Hotwire tips to get a perfect tapered wing (pun intended) Why make a tapered wing? “Only design a tapered wing if you never intend to...

Why the 3-channel trainer should be your first model You want to get into R/C planes but have never flown a plane before, then choosing...

Are two shocks really better than one My first attempt at making oversized Bush Plane landing gear was a solid success. The piggyback...

If you want to have a custom OSD, my advice is don’t start from scratch, hack one. OSDs are useful because they let you display...

The 3 most important things to know Suspension design can be a complicated topic, easily worthy of a full time career. I’m not an expert...

Coming off of the 2020 panorama, it became clear that big gains aren’t always possible. I came to the realization that 2020 is just going...

The quickest way to turn a finished glider into a pile of balsa is to launch with the CG in the wrong position. In the previous post I...

Stability is the seasoning salt of aviation. Every airplane needs some, but going overboard will ruin a good bird. In airplane terms,...

My Garmin Venu fitness watch finally arrived after 3 months of waiting on pre-order.  I was a Track-Order fiend. Needless to say, I was...

I recently tried to 3D print a bolt and nut, thinking it couldn’t be that hard, it’s a trap and here’s why. Standard metric bolt and nut...